sandipsolar

Popular posts from this blog

li ion battery course

Commissioning Procedure After the installation of any PV system is completed and the inspection is done, the system will be ready to be plugged to the grid to transfer energy. That process is referred to as Commissioning the system. At the same time, the installer will hand the responsibilities to the owner or operator of the system. There are steps and requirements to commissioning PV systems that vary depending on system size and complexity of design. However, there are general guidelines that apply to most systems. Final checkout The system should be checked thoroughly before the commissioning starts. A highlight of the main electrical items to consider: All disconnects are in (OFF) position during the final checkout.? Installation matches the design documentation.? Conductors, OCPD, and disconnect are sized appropriately.? Compliance with all local AHJ and national codes (including NEC) is met.? Terminals connections and screws are securely tightened. ? A highlight of the main mech...
Read more

PV Panel recycling technologies

Image
  Solar power is booming, with millions of metric tons of solar panels being produced each year. A panel has a projected lifespan of about 25 years, which means that today’s new solar farms will go out of service in the late 2040s. Most of the weight in a solar panel, about 75 percent, is glass, aluminum, with 10 percent; wiring in a junction box, at 5 percent; and silicon, with just 3.5 percent. Dedicated recyclers are needed, the authors write, to do a more thorough job of recycling all the components of a panel—including the crystalline silicon in the photovoltaic cells themselves. Silicon wafers account for about half the cost of a panel, as well as over half the energy and carbon footprint of manufacturing a panel. But silicon isn't currently being targeted for recycling much because the recovered silicon isn't pure enough to go straight back to a wafer manufacturer. Studies show that the impurity levels are an important issue during the recycling processes.  Th...
Read more